| 首页 > B2B平台国际买家 > 国际买家&全球买家&世界买家D | |||
| 昨晚收到的询盘 | |||
| 发布时间： 2024-6-28 浏览：37 | |||
|
发 布 人：todaytex 更多信息请联系QQ：1407106692 微信：1407106692 联系网址：http://www.todaytex.com |
|||
|
公司：昨晚收到的询盘 国家：** 联系人：** 地址： From: Digital Security Solutions. L.L.C. Subject: Buy Ballistic Helmet Country: United Arab Emirates Date: June 22, 2010 Message: Dear Sir, We are looking for Military Ballistic Helmet 25000 pieces for U.A.E. Armed Forces. Its specification and certifications are required by the Armed Forces as shown here under. Please quote, if you are meeting the exact specification as given and NATO quality cercifictions are obtained for your Products. Please provide full details for Prices, delivery and condition of items. NATO NSN for each items. Correct Parts Numbers S & H fees and shipping charges. Cerificate of Origin. Original Manufacturer Certificate. Certificate of Conformity Warranty Certificate QUALITY REQUIREMENTS, Weight of the helmet, because of light meterials, the wight of helmet satisfy the PQP if don't. Size. Marks. Weight. 53-59 cm M 1450 gms 60-62 cm L 1650 gms. SHAPE STABILITY. Shape stability is to be ascertained through measuring of Helmet deformation under pressure inthe ear axis. Elastic (temporary) deformation measured in the ear axis as gap (space) before and after pressure should not exeed 40mm. Plastic (Permenant, residual) deformation after pressure, measured in the ear axis should not exceed 5mm. BALLISTIC PROTECTION V50. The Helmet must reach Ballistic Protection against 1,102 g fragments according to stanag 2920 at least to the speed of 650 m/s on the point of the impact. DYNAMIC SUBSIDENCE(DYNAMIC TRAUMA) The Helmet must fulfil the requirement to the resistance against dynamic deformation by the impact with 1.102 g fragment simulation according to STANAG 2920. The requirement is to fulfil if the projectile with the 90% of the projected speed on the target(90% of 650=585m/s) cuase not more than 20mm bulge inside of the shell. RESIDENCE ON PARA 9MM. The Helmet Must stop the ammunition 9mm x19mm Para FMJ shoooted in the crown of Helmet with the speed of 400=10m/s. The bullet should not penetrate the shell. HOLDING OF THE EDGE OF HELMET. Profile rubber must stand the power of 8 N during 2 minutes without secession. STORAGE AND DURABILITY. Storage. The Helmet must be able to store in conditions from -35 degree centigrade to + 650 degree centigrade and relative humidity of air from 100%. At this conditions Helmet will keep own characteristics. DURABILITY. Original packing Helmet by regular storage should be protected to 10 years. At normal use, the duration term of shell is 4 Years, and inside equipment 2 Years. After 4 Years of normal use, the Helmet will keep 90% of Ballistic characteristic of new Helmet. ATTACHMENTS REQUIRED Manufacturer Protocols and Meterial Certifications from Producers. Scheme of gunshot by Ballistic tests. Ballistic test reports of raw shell. Ballistic test report of shell. Test report of shape stability. Test report of final edge stichness. Meterials Certificates from Producers. We are expecting your reply soon. Thanks and Best Regards Address: Abu Dhabi. U.A.E. Telephone: 971-2-6729676 Fax: 971-2-6728758 电话：** 传真： ** QQ号: 1407106692
微信号: 1407106692
扫一扫加客服微信，领取更多客户资料  微信公号: 锦日外贸名录集 (关注后，天天免费推最新买家资料)  采购本类产品及：** |
|||